just going with full size 60 up front and full float 60 rear 8 lug, was going to run this with my 44.
Rear semi float 60 housing, has truss, all cleaned off of old brackets, 60" end to end (roughly 65" wms with shafts), shaved. From a 71.5-73 IHC pickup

NO; gears, diff, brakes $250 with one 5x5.5" bp 35 spline moser shaft

3.125"x~5/16" thick tubes

Ran the BOM and it is from a early 70's IHC pickup/station wagon

Would be a nice match to a hp44 front, espically if you want a ARB much more reliable then a 9" ARB