Figured we'd offer a killer deal on onboard C02 airtanks and regulators to the GLXJ club.



Great for trail repairs, filling up tires, or running your air lockers! The Co2 cylinder is produced from high strength aluminum alloy 6061-T6. These tanks are popular because they are not as heavy as steel tanks and do not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. This cyldiners is stamped with required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. It comes with the regulator. You can use this high pressure regulator on any Co2 Tank with a CGA-320 valve. Co2 tanks have a male thread (CGA-320), these regulators have a female thread. Double Gauge Regulators Measure PSI, as well as the Volume of Co2 in the Cylinder. They are good for indicating how much Co2 is left in the cylinder and when you should have it refilled. The handle on the front is used to adjust the output pressure. They have a 175psi saftey release valve on them as well. All you will need to purchase is the coiled air hose and airchuck. We can offer it to you for an additonal cost if you'd like.

Tank and Regulator - $160 + shipping
Tank Boot (optional) - $20 + shipping

To purchase please email us at sales@motionoffroad.com or you can PM us here.

DISCLAIMER: This product is meant to be used offroad. Use caution when transporting filled tanks. Tanks do contain a relief valve and their is always a possibility of tank pressure relief due to extreme temperature changes. Keep out of direct light to help maintain constant tank temperature and reduce the chances of tank relief.


-- Edited by Motion Offroad at 22:57, 2007-06-03