not sure what to do... snake oil (works sometimes) remove, scrape off gasket stuff, put new make a gasket on same as above but add new gasket and goop on each side of gasket.
see pics.
-- Edited by ChevelleSSLS6 on Thursday 2nd of July 2009 02:27:28 PM
-- Edited by ChevelleSSLS6 on Thursday 2nd of July 2009 02:27:45 PM
-- Edited by ChevelleSSLS6 on Thursday 2nd of July 2009 02:28:07 PM
in picture 4/6 it looks like the housing is cracked... being a little wet as I refilled coolant and let it idle until I noticed fresh dripping, then took a couple pics. Bottom bolt is tight, so if I removed it and put some pipe thread sealant (goop type, not tape) on the bolt and re-torqued it down, it might fix this? More experienced people's input is appreciated.
-- Edited by ChevelleSSLS6 on Thursday 2nd of July 2009 02:31:19 PM
__________________
My Fleet 1996 XJ "Snowball"- 3.5" lift, bunch of little mods. I hate pegleg rear axles! 1974 AMC Javelin "Jade Grenade"- 360v8, 4sp, green inside and out. Underfunded Project. 2009 Kawsaki Vulan 900 "Rocket III"- Summer DD
I'll pull it and check it out. If it's cracked (hopefully not, I got a pricey hesco unit) I'll take pics. I'll grind (so it's nice and rough) and apply some JB. I'm not into hackjobs, but I'm not rich, so I'll do what I can with what I have.
That kind of what Jeepin' is about, right? -Matt
__________________
My Fleet 1996 XJ "Snowball"- 3.5" lift, bunch of little mods. I hate pegleg rear axles! 1974 AMC Javelin "Jade Grenade"- 360v8, 4sp, green inside and out. Underfunded Project. 2009 Kawsaki Vulan 900 "Rocket III"- Summer DD